Files of check-in [a1fba82110]
in the top-level directory
This will build a Tclkit named "tclkit-<version>" or a KitDLL named
"libtclkit<version>.so".
---------------
Using This Tool
---------------
Usage:
kitcreator [{build | retry | clean | distclean}]
[{<version> | cvs_<tag> | fossil_<tag>}]
[<configure_option> ...]
Where:
version is a Tcl version number (e.g., 8.6.1)
tag is a CVS or fossil release tag (e.g., HEAD)
configure_option option to pass to subordinate configure
scripts (e.g., --enable-64bit)
Default is to create a Tclkit from Tcl version 8.6.1
Examples:
1. Create a Tclkit:
a. $ ./kitcreator
2. Create a Tclkit for Tcl 8.5.15:
a. $ ./kitcreator 8.5.15
3. Create a Tclkit for Tcl from CVS HEAD:
a. $ ./kitcreator cvs_HEAD
4. Compile a 64-bit Tclkit:
a. $ ./kitcreator --enable-64bit
5. Cross-compile a Tclkit:
a. Bootstrap (optional, you can use an existing Tclkit):
i. $ ./kitcreator
ii. $ mv tclkit-8.4.19 tclkit-local
iii. $ TCLKIT="`pwd`/tclkit-local"
iv. $ export TCLKIT
b. Cross-compile:
i. $ CC=mipsel-linux-uclibc-gcc
ii. $ CXX=false
iii. $ AR=mipsel-linux-uclibc-ar
iv. $ RANLIB=mipsel-linux-uclibc-ranlib
v. $ export CC CXX AR RANLIB
vi. $ ./kitcreator --host=mipsel-linux-uclibc
Note: When cross-compiling, the Tcl configure script may be unable
to determine which serial support method to use. If you want serial
support in a cross-compiled tclkit, specify it manually, e.g.:
$ ./kitcreator CFLAGS=-DUSE_TERMIOS=1 -host=mipsel-linux-uclibc
6. Compile a 64-bit Tclkit 8.5.15 using SunStudio 12.1 on Solaris/x86:
a. $ CC='/opt/sunstudio12.1/bin/cc -m64'
b. $ CXX='/opt/sunstudio12.1/bin/CC -m64'
c. $ PATCH='gpatch'
c. $ export CC CXX PATCH
d. $ ./kitcreator 8.5.15 --enable-64bit
7. To clean up post-build:
a. $ ./kitcreator clean
8. Create a Tclkit without Metakit4 support (falls back to Zip for storage):
a. KITCREATOR_PKGS='tk itcl'
b. export KITCREATOR_PKGS
c. ./kitcreator
9. Create a Tclkit with Metakit4 support, but using Zip for storage:
a. $ ./kitcreator --enable-kit-storage=zip
10. Create a Tclkit with Metakit4 support, but using C-VFS for storage
a. $ ./kitcreator --enable-kit-storage=cvfs
11. Create a KitDLL without Metakit support (will not create a Tclkit
binary, just the library):
a. $ KITCREATOR_PKGS='tk itcl kitdll'
b. $ export KITCREATOR_PKGS
c. $ ./kitcreator
Environment variables:
1. MAKE
Specifies the tool you wish to be called to build targets
from a Makefile. This script is generally more well tested
with GNU Make.
2. PATCH
Specifies the tool you wish to be called to apply unified
diff patches. This script is generally more well tested with
GNU Patch.
3. TCLKIT
Specify the path to a Tclkit that is runnable on the current
system. The default is "tclkit". A working tclkit is required
for cross-compiling Tclkits.
4. STATICTK
Specify this as "1" to statically link to Tk. The default
action on most platforms is to dynamically link to Tk. When
building KitDLL, STATICTK is "1" by default. If you want to
enable dynamic linking of Tk with KitDLL you will have to
specify this as "-1".
5. STATICMK4
Specify this as "0" to attempt to create create the "mk4tcl"
project as a shared object. If this fails, it will fall back
to building statically. Specify it as "-1" to force building
it as a shared object. Any other value, including being unset
results in "mk4tcl" being built and linked statically. KitDILL
sets this to variable to "0". If Metakit4 is built shared, it
cannot be used for the kit storage for Tclkit.
6. STRIP
Specifies the tool you wish to be called to strip object files,
archives, and shared objects. The default is "strip". You
should probably set this if you are cross-compiling.
7. KITCREATOR_PKGS
Specify which non-required packages to build. The default list
is:
tk itcl mk4tcl
If mk4tcl is not present a Zip-based storage mechanism will be
used instead. To specify that the default be used, do not set
this or set it to the empty string. To specify that no
non-required packages be built, set it to a string that
contains only white space.
If "kitdll" is specified in the list the target becomes KitDLL
and no Tclkit will built, but instead libtclkit.
8. KITCREATOR_MINENCODINGS
Set this variable to a non-empty string to generate a Tclkit
without all encodings, only including the following:
ascii.enc cp1252.enc iso8859-1.enc iso8859-15.enc
iso8859-2.enc koi8-r.enc macRoman.enc
9. KITCREATOR_MINBUILD
Set this variable to a non-empty string to exclude unnecessary
packages from Tcl build. This excludes the following packages:
tcltest
Additionally, any bundled packages (in the "pkgs" directory)
are excluded. This typically includes (as of Tcl 8.6):
itcl thread
10. KC_TCL_STATICPKGS
Set this variable to the value "1" to attempt to force the
packages included in the "pkgs" directory of Tcl 8.6+
to be compiled statically
11. KITCREATOR_STATIC_KITDLL
Set this variable to the value "1" to build a static KitDLL.
This only has an affect when KITCREATOR_PKGS specifies that
"kitdll" is to be built (e.g., KITCREATOR_PKGS='kitdll')
12. KITCREATOR_ITCL3_FORCE
Set this variable to the value "1" to build [incr Tcl] version
3.x even with Tcl 8.6+. Note that [incr Tcl] 4.x will still
be built as part of Tcl 8.6+ (unless excluded using
KITCREATOR_MINBUILD).
Cross compiling Environment Variables:
1. CC
C compiler e.g. i686-pc-mingw32-gcc
2. CXX
C++ compiler. Required if you want to use mk4tcl. e.g. i686-pc-mingw32-g++
If not required, you can set it to the string "false"
3. AR
Library creator e.g. i686-pc-mingw32-ar
4. RANLIB
Library post processing executable e.g. i686-pc-mingw32-ranlib
5. STRIP
Executable name to strip binaries e.g. i686-pc-mingw32-strip
6. NM
Executable used to dump names from the objects e.g. i686-pc-mingw32-nm
7. CC_FOR_BUILD, HOST_CC
Set this to the name of compiler on the host on which
the cross compilation is being run.
On Windows we also need this:
1. RC
Resource compiler : e.g. i686-pc-mingw32-windres
Kitsh Configure Options:
1. --enable-kit-storage={zip|mk4|cvfs|auto}
Specify which type of storage to use with the Tclkit. The
default is to auto-detect. Auto-detection uses Mk4 if
available and built statically, otherwise it falls back to Zip.
2. --with-obsfucated-cvfs
Specify that CVFS should be obsfucated. The contents of the
CVFS are encrypted on disk and the encryption key is included
in the executable. Files are then transparently decrypted on
access.
--------------------
Using the KitDLL SDK
--------------------
When you build a KitDLL, a "libtclkit-sdk-<tclvers>.tar.gz" tarball is also
produced. This tarball contains the Tcl (and Tk, if compiled) stubs libraries,
and Tcl (and Tk, if compiled) header files needed to compile and link things
against Tcl (and Tk). It also includes "tclConfig.sh" (and "tkConfig.sh", if
Tk was compiled).
The purpose for this tarball is to be used to build Tcl extensions or
applications that rely on Tcl/Tk using the KitDLL.
To use it, one first must extract the tarball. After that the environment
variable "TCLKIT_SDK_DIR" must be set to the directory that was created in
order to make most of the variables contain useful values.
For example, to build an extension using the KitDLL SDK one would typically do
something like:
1. Compile KitDLL (may be omitted if the KitDLL SDK is already
available)
a. $ KITCREATOR_PKGS='tk itcl kitdll'
b. $ export KITCREATOR_PKGS
c. $ ./kitcreator
2. Compile the Extension
a. $ tar -xf /path/to/libtclkit-sdk-8.4.19.tar.gz
b. $ TCLKIT_SDK_DIR="$(pwd)/libtclkit-sdk-8.4.19"
c. $ export TCLKIT_SDK_DIR
d. $ ./configure --with-tcl="${TCLKIT_SDK_DIR}/lib"
e. $ make
-------------------
Method of Operation
-------------------
Summary:
1. "kitcreator" calls */build.sh
2. */build.sh downloads and compiles appropriate software
3. */build.sh installs software into "inst" (run-time + compile-time)
4. */build.sh installs run-time software into "out", this will be
included in the Tclkit as if it were the root directory of the
Tclkit (combined with other "out" directories)
5. kitsh/build.sh compiles a "main" function and links all the built
libraries together into an executable
6. kitsh/build.sh combines all the "out" directories into one
7. kitsh/build.sh creates a Metakit or Zip database from the combined
directories and appends that to the compiled executable using:
a. A Tclkit found in the environment variable "TCLKIT" (tclkit
if unset) if it is functional; or
b. The built kit itself (does not work for cross-compiling)
Details:
The general mechanism that enables a Tclkit to operate is a small Tcl
initialization routine linked statically to the core libraries needed to
operate a Tcl interpreter, the Tcl VFS Layer, and a database-backed (Metakit)
Virtual File System that is appended to the end of the executable.
This project brings together all of the required pieces, plus some additional
pieces that were found in the original Tclkit:
1. Tk (dynamically linked)
2. Itcl (dynamically linked)
The source code for these pieces are downloaded, compiled, and linked, and the
database containing the appropriate filesystem data is created. What sets
this project apart from other similar projects is that:
1. It attempts to be modular;
2. It supports cross-compiling;
3. It downloads the source from their original repositories;
4. It allows you to specify an arbitrary version of Tcl (including
CVS); and
5. It uses GNU Autoconf scripts for compiling the part of the Tclkit
that brings the whole thing together (the Kitsh)
To accomplish these goals the following mechanisms are in place:
1. The top-level "kitcreator" script; and
2. Per-project subdirectories, each containing a "build.sh" script
The top-level "kitcreator" script is very simple. Its only job is to
interpret command line arguments, and call the per-project "build.sh" scripts.
For the "tcl" project it also finds the appropriate "tclConfig.sh" (and stores
this path in TCLCONFIGDIR) to enable subsequent build scripts to find the
appropriate Tcl to link against.
The per-project "build.sh" scripts are entirely autonomous. They are
responsible for downloading the source code for the appropriate version that
will compile and link against the current version of Tcl (user requested
version can be found in "TCLVERS", while the actual version must be requested
from the "tclConfig.sh" script), compiling it, installing a functional copy
into the per-project "inst" directory, and installing anything that needs to
be in the Tclkit's VFS root into the per-project "out" directory.
Any additional projects can be included simply by creating the appropriate
directory in the same directory as the "kitcreator" script, creating a
"build.sh" script in that directory that follows the above procedure, and then
referencing that directory in "KITCREATOR_PKGS" for the "kitcreator" invocation.
In this way KitCreator is "pluggable". Included packages may be either
statically or dynamically linked. If it is statically linked then the module
name must be the name of the directory -- that is, if the directory were "foo",
KitCreator will expect to initialize the module statically using Foo_Init().
The exception to this is the "kitsh" project. It is the glue that binds all
the individual projects together into a single executable. Its build script
does not create an "inst" or an "out" directory because it is not a library.
Instead, it collects all the other project's "out" directories into a single
directory (starpack.vfs), as well a static file (boot.tcl). It then compiles
the source code, and then installs the VFS onto the resulting executable.
The VFS is created by the "installvfs.tcl" script for Kitsh. For KitDLL the
VFS is created by "dir2c.tcl".
If the "mk4tcl" project fails to build (or is not requested to be built),
the rest of the project will be built using zip files instead of Metakit
databases.
To create the storage database, one of two Tclkits is used (tried in this
order):
1. The Tclkit specified by the TCLKIT environment variable (or
"tclkit" if that variable is not set) if it is functional; or
2. The built Tclkit itself
The second method will not work if the built Tclkit is not executable on the
current platform (i.e., in the case of cross-compilation) and so it may be
necessary to bootstrap a runnable Tclkit first.
KitDLL mounts the VFS for every interpreter that calls Tcl_Init(). The system
VFS that is created at build time is mounted at /.KITDLL_TCL. Additionally,
if there is a ZIP file appended to the DLL it will be mounted at /.KITDLL_USER
and if there is a ZIP file appended to the executable it will be mounted at
/.KITDLL_APP. All VFSes that are mounted have the "lib" sub-directory appended
to the interpreters "auto_path" variable.
